MatsP
August 14th, 2006, 11:48 AM
I absolutely HATE it when people put nose-prints on my photos ;-) But yes, that's indeed true - and the opposite: If you don't have good light, even the most expensive lenses wouldn't make any difference - but no-one bothered to tell Steve Mitchell that ;-)
--
Mats
--
Mats
wallpaper Match the names with the
lostinbeta
09-06 04:08 PM
That footer would kick arse to techno music. I love the techno music! I think you just aren't pleased with it because it's yours. I know I am not fully pleased with mine. But I keep getting compliments on it, so I guess it is good.
I guess it is because since you made it, you got to see it all the time, so to us it is new, but to you it is old, so we are like "oh wow" and you are just like "eh, its alright".
I guess it is because since you made it, you got to see it all the time, so to us it is new, but to you it is old, so we are like "oh wow" and you are just like "eh, its alright".
Sunx_2004
07-09 11:01 PM
For private courier (non usps deliveries) there is different address please see in the Instruction on completing I-765 form on USCIS website.
I send my application via fedex today to following address..
For private courier (non-USPS) deliveries:
USCIS
Nebraska Service Center
850 S. Street
Lincoln, NE 68508-1225
I am not sure of USCIS P.O. Box address, but in general Fedex can't be sent to USPS P.O. Box.
Very rarely USCIS gives street address for sending application.
I send my application via fedex today to following address..
For private courier (non-USPS) deliveries:
USCIS
Nebraska Service Center
850 S. Street
Lincoln, NE 68508-1225
I am not sure of USCIS P.O. Box address, but in general Fedex can't be sent to USPS P.O. Box.
Very rarely USCIS gives street address for sending application.
2011 Computer Hardware | Page 49
jatinr
08-03 05:40 PM
My I-140 is approved.
But as per the August visa bulletin all the country visa numbers are U right. The August 17th is just an extension for the July visa bulletin rollback right?
You are right, if you apply now, you will get 3 yr extension. The extenion is based on whether your I-140 is approved and if the visa numbers are unavailable at the time of applying for extension.
But as per the August visa bulletin all the country visa numbers are U right. The August 17th is just an extension for the July visa bulletin rollback right?
You are right, if you apply now, you will get 3 yr extension. The extenion is based on whether your I-140 is approved and if the visa numbers are unavailable at the time of applying for extension.
more...
smuggymba
09-30 03:04 PM
mods - please delete
3ZS
May 11th, 2006, 07:36 PM
Hi -
I just bought a nikon d50 kit and the dealer sold me sigma lens' with the kit. I have since upgraded the camera body to a d70S. Now I am having problems with the lens', autofocus doesnt work all the time. Sometimes it works...then other times it wont focus at all.
Does anyone know if the sigma 18-50mm and the 70-300mm af/mf lens' are compatable with the d70s?
The dealer told me the sigma lens were better then the nikor lens' because they have a metal mount whereas the mikor was a plastic mount. is this true and is this somethign i really should have worried about?
I just bought a nikon d50 kit and the dealer sold me sigma lens' with the kit. I have since upgraded the camera body to a d70S. Now I am having problems with the lens', autofocus doesnt work all the time. Sometimes it works...then other times it wont focus at all.
Does anyone know if the sigma 18-50mm and the 70-300mm af/mf lens' are compatable with the d70s?
The dealer told me the sigma lens were better then the nikor lens' because they have a metal mount whereas the mikor was a plastic mount. is this true and is this somethign i really should have worried about?
more...
sbmallik
05-28 03:46 PM
If you will work for a Canadian Company within US, then you need a US work visa (H-1B for example). However, in this process you will not satisfy the residency requirements for your Canadian PR. Please note that you need to live in Canada for at least 2 out of 5 year period to maintain the PR.
2010 the same name brand parts?
vin13
09-30 03:37 PM
If your last FP was more than 15 months ago, then write to local congressman, that usually works.
But would you get a notice or RFE or something like that....I am asking because i am my spouse both have recieved RFE's today....so wanted to assume something till we get the actual mail.
But would you get a notice or RFE or something like that....I am asking because i am my spouse both have recieved RFE's today....so wanted to assume something till we get the actual mail.
more...
gccovet
12-17 01:53 AM
Thanks all for your replies...perhaps my question is not clear...I would have posted a new thread but was not easily able to figure out how to do so...
Will try to ask my question again...
I am not worried about when my FP expires and things on those lines....
my questions is for jobs that require green card or citizenship... there are some federal jobs out there that require security clearance....and for which they need either green card holders or citizen I beleive...
Now if one has an EAD (no green card yet, 485 pending for more than 1 year) and has got his/her FP done in FEB 2008 what does that mean...does it mean that once you have your FP done there is some kind of security clearance that you get from FBI ?...can you say you have active security clearance..if so what kind of security clearance is that called ?...as I said when I went for the Biometrics/FP (Code 3) they stamped the notice with the following
Biometrics Processing Stamp
ASC Side Code: __________XTE<location>
Biometrics QA Review by ________ (officer's signature)
Tenprints QA Reivew (officer's signature)
Thanks Gurus !!
SEcurity clearence for jobs are different / separate then immigration stuff. non-imm aliens can get lowest level of security clearance.
GCCovet
Will try to ask my question again...
I am not worried about when my FP expires and things on those lines....
my questions is for jobs that require green card or citizenship... there are some federal jobs out there that require security clearance....and for which they need either green card holders or citizen I beleive...
Now if one has an EAD (no green card yet, 485 pending for more than 1 year) and has got his/her FP done in FEB 2008 what does that mean...does it mean that once you have your FP done there is some kind of security clearance that you get from FBI ?...can you say you have active security clearance..if so what kind of security clearance is that called ?...as I said when I went for the Biometrics/FP (Code 3) they stamped the notice with the following
Biometrics Processing Stamp
ASC Side Code: __________XTE<location>
Biometrics QA Review by ________ (officer's signature)
Tenprints QA Reivew (officer's signature)
Thanks Gurus !!
SEcurity clearence for jobs are different / separate then immigration stuff. non-imm aliens can get lowest level of security clearance.
GCCovet
hair Category Computer Hardware amp;
rkp27
07-11 01:56 PM
yes, now we should all start calling uscis - atleast 10 times a day, open SRs, take 4-5 infopass appointments and maybe consider going to NSC or TSC in person to see if we can talk to the IO (or have a cup of tea with the IO) to expedite our respective cases.
Who knows, if we do such things, we mite get our GCs faster than ppl already waiting ahead of us in the queue. :)
I wud also take this oppurtunity to invite more EB3 ppl to convert to EB2 now....this way, u cud get a EB-2 PD back in time, when u were not qualified for EB2. And with all desi body shops, getting this done is a piece of cake, i would assume.
Now boot me from the forums or give me all those red marks - i don't care. I wrote what was on my mind.
Friends
Let behaves like a GENTALMAN... THIS POST WILL NOT HELP ANYBODY INLCUDING POSTER.
hope this helps everybody who willing to post such frustration. Please keep all thoes with your self and dont bother others.
DONT POST ANY MORE PLEASE, I THINK I DID MISTAKE BY WRITING. I THOUGHT THIS GOOD SITE/FORUM TO GET INFORMATION BUT I WAS WONG.
GOD BLESS ALL OF YOU.
Who knows, if we do such things, we mite get our GCs faster than ppl already waiting ahead of us in the queue. :)
I wud also take this oppurtunity to invite more EB3 ppl to convert to EB2 now....this way, u cud get a EB-2 PD back in time, when u were not qualified for EB2. And with all desi body shops, getting this done is a piece of cake, i would assume.
Now boot me from the forums or give me all those red marks - i don't care. I wrote what was on my mind.
Friends
Let behaves like a GENTALMAN... THIS POST WILL NOT HELP ANYBODY INLCUDING POSTER.
hope this helps everybody who willing to post such frustration. Please keep all thoes with your self and dont bother others.
DONT POST ANY MORE PLEASE, I THINK I DID MISTAKE BY WRITING. I THOUGHT THIS GOOD SITE/FORUM TO GET INFORMATION BUT I WAS WONG.
GOD BLESS ALL OF YOU.
more...
divs09
06-19 11:54 AM
Hello Unseenguy,
Thanks for the reply .
I forgot to mention that i was already on h1 before so i dont fall under H1CAP.
This is the reason i applied for H1 from h4 as previously i was on H1B
Thanks for the reply .
I forgot to mention that i was already on h1 before so i dont fall under H1CAP.
This is the reason i applied for H1 from h4 as previously i was on H1B
hot Local Company Name:
gc_kaavaali
07-27 07:17 PM
When applying for H1B did u also apply for change of status? if you did you can start work on H1B from october onwards. If not you have to get out of the country and get it stamped.
I came to USA on L1A through company A in February,2008 and working on L1 A till date.My I-94 is valid till feb,2011.
I filed H1B through company B in April,2007 in India and got approved petition in August,2007. That approved petiton is with my company B in USA.I have not gone for H1 B stamping.
Now I want to switch to H1 B in USA.I was told by my friends that,I can work on H1 B with my approved H1 petition.and I need not to go for H1B stamping.
I need to get visa stamped only if I goto India and to come back USA.
Can I work directly on my H1B petition with out stamping visa?
Incase, stamping is required, Shall I go to canada/Mexico for H1 B visa stamping.
Can I come back to USA with my L1 visa from canada/Mexico incase H1 b visa not issued? or shall I need to go back to India from Canada/mexico it self?
I came to USA on L1A through company A in February,2008 and working on L1 A till date.My I-94 is valid till feb,2011.
I filed H1B through company B in April,2007 in India and got approved petition in August,2007. That approved petiton is with my company B in USA.I have not gone for H1 B stamping.
Now I want to switch to H1 B in USA.I was told by my friends that,I can work on H1 B with my approved H1 petition.and I need not to go for H1B stamping.
I need to get visa stamped only if I goto India and to come back USA.
Can I work directly on my H1B petition with out stamping visa?
Incase, stamping is required, Shall I go to canada/Mexico for H1 B visa stamping.
Can I come back to USA with my L1 visa from canada/Mexico incase H1 b visa not issued? or shall I need to go back to India from Canada/mexico it self?
more...
house You name it, I have replaced
telekinesis
10-22 09:45 PM
Oh how I miss my Playstation :*(
tattoo computer parts packaging,
green2007
09-13 02:49 PM
EB-3
Mail Date: June 29, 2007
Received Date: July 2, 2007 @ 10:25a singed by J. Barrett
RN
I 485- 9/12
I 765- 9/12
I 131- 9/12
Just be patient guys. I stop worrying about it and finally got all the receipt notice.
Good Luck
Mail Date: June 29, 2007
Received Date: July 2, 2007 @ 10:25a singed by J. Barrett
RN
I 485- 9/12
I 765- 9/12
I 131- 9/12
Just be patient guys. I stop worrying about it and finally got all the receipt notice.
Good Luck
more...
pictures This is the common name for an
mzdial
March 28th, 2004, 11:49 PM
It's always good to catch someone when they have no idea.. :-)
I'll post up my attempts from the fan perspective.. I'll start another thread and share my thoughts on shooting from the stands.
-- Matt
I'll post up my attempts from the fan perspective.. I'll start another thread and share my thoughts on shooting from the stands.
-- Matt
dresses THe CPU has four key parts
gc_kaavaali
11-14 10:24 AM
hey fearonlygod,
Do you want to tell us your employer name? It helps other people...if u don't like u can ignore it.
I had similar situation where on H1B he was showing different salary...but he was paying less..difference is almost $10000 per year...it is between Aug 2003 and Oct 2004...Can we do anything now?
Do you want to tell us your employer name? It helps other people...if u don't like u can ignore it.
I had similar situation where on H1B he was showing different salary...but he was paying less..difference is almost $10000 per year...it is between Aug 2003 and Oct 2004...Can we do anything now?
more...
makeup Basic Computer Components
lostinbeta
09-06 02:19 PM
I started with 6. It isn't THAT much of an upgrade from 6. It does have a few little features that I like, like dynamic brushes that change direction and color.
girlfriend We specialise in offering Computer Assembly products, Computer Components
Since1997
08-13 11:32 AM
By the way 765 they say compliant till 7/2 which means individually filed 765 not the 765 which was sent with 485 package - Right ? Thanks! Yes, I think the status is for individual applications only - as far as I know.
If it goes with the same pace...then it may take very very long time to clear Jul 2nd - Aug 17th applications (receipt process)...unless they increse man power OR come-up with soem alternatives.....
Anyway TSC is far betther than NSC....
If it goes with the same pace...then it may take very very long time to clear Jul 2nd - Aug 17th applications (receipt process)...unless they increse man power OR come-up with soem alternatives.....
Anyway TSC is far betther than NSC....
hairstyles Computer Hardware Question?
vallabhu
09-10 10:04 AM
Currently on H1B 8th year extension which will expire on 25th June, 2009.
Labor PD: 9th August, 2004
Labor cleared: 11th September, 2007.
I-140 (approval pending) filed on 4th October, 2007. Received at USCIS on 5th October, 2007.
Can’t file for I-485 since the EB3 date for India is unavailable.
There is a high chance that I might be laid off at my current employer in the next 2-3 weeks.
Can I transfer my H-1 upto June 25th, 2009 (or later) as well as start a new PERM case in EB2 category?
In case of the above H-1 transfer, will the new H-1 be valid for 1 year from the filing or will it be upto 25th June, 2009?
What are my other options not to go out of status or leave the country?
To my knowledge you do not need have Labor pending from the same company you apply for H1 extension we did the same thing for on of my colleague here he had labor pending form his previous company and we hired him in his 7th year extension with no issues
So find a new job apply for H1 do premium show this pending labor and pending I140 as basis for H1 extension and transfer
an then apply for new perm and if your existing company is willing the share copy of your I140 if it is approved you can carry over the priority date too.
if they revoke I140 nothing can be done even you H1 extension will be in jeopardy it will totally depend on the adjudicator's understanding of the law to process your application
Labor PD: 9th August, 2004
Labor cleared: 11th September, 2007.
I-140 (approval pending) filed on 4th October, 2007. Received at USCIS on 5th October, 2007.
Can’t file for I-485 since the EB3 date for India is unavailable.
There is a high chance that I might be laid off at my current employer in the next 2-3 weeks.
Can I transfer my H-1 upto June 25th, 2009 (or later) as well as start a new PERM case in EB2 category?
In case of the above H-1 transfer, will the new H-1 be valid for 1 year from the filing or will it be upto 25th June, 2009?
What are my other options not to go out of status or leave the country?
To my knowledge you do not need have Labor pending from the same company you apply for H1 extension we did the same thing for on of my colleague here he had labor pending form his previous company and we hired him in his 7th year extension with no issues
So find a new job apply for H1 do premium show this pending labor and pending I140 as basis for H1 extension and transfer
an then apply for new perm and if your existing company is willing the share copy of your I140 if it is approved you can carry over the priority date too.
if they revoke I140 nothing can be done even you H1 extension will be in jeopardy it will totally depend on the adjudicator's understanding of the law to process your application
kumar1
03-20 11:35 AM
I do not think, number of employees matter. I work for a desi company and it has just 2 employees. Labor was breeze and 140 got approved in 4 weeks. Never got any RFE. However, I was in EB-3 despite having 4 years bachelor's degree and 5+ years of experience.
yabadaba
06-30 04:07 PM
sanju,
CIR is dead. no point flogging a dead horse. right now we are just trying to gather information and facts...by calling this guy names will not help anything. i know he has been ostracized on IV a whole lot for what happened at the guiterrez rally. but let bygones be bygones... cir is dead..no point blaming him for it
CIR is dead. no point flogging a dead horse. right now we are just trying to gather information and facts...by calling this guy names will not help anything. i know he has been ostracized on IV a whole lot for what happened at the guiterrez rally. but let bygones be bygones... cir is dead..no point blaming him for it
No comments:
Post a Comment